2026 Iron Bull Trailers DTB14 83x14, 14999- 07593

2026 Iron Bull Trailers DTB14 83x14, 14999

A new ramp system removes the traditional ramp door flaps. 7-Gauge flooring is still standard on these models along with a fan favorite oversized front toolbox. The dump box side-step received a minor refresh with the addition of a gate pin and ramp lanyards. The rear gate latching system will now be housed inside the corner post offering greater protection to the operating components. A new stylized single break diamond plate fender was incorporated into the refresh and the jack mounting system was revised to allow for easier jack installation. Corrosion resistant tarp sail rod and crank handle hardware has also been incorporated based on customer feedback. It’s the same tough Bull with a new hard-hitting look. These show-stopper dump trailers are built to haul. 14,000-21,000 lbs of GVWR and are equipped with enough lifting power to ensure you can always get your job done. Each Iron Bull 83 wide dump comes equipped standard with an industry best 7 gauge floor and 24" high 10 gauge sides with 7 machined breaks that will not bend, bow, or buckle, even under the most demanding conditions. One of the most unique features on the Iron Bull DTB is the structure under the bed. These full length bed runners ensure your floor is never warped across the crossmembers by any heavy tracked equipment you might haul. We have also equipped 10k jacks and a side step for easy bed access. A three way gate will ensure maximum flexibility for transport and dumping. 

Top tier components come together with the most rugged construction on the market to deliver a dump trailer like no other. Brake axles and radial tires provide a solid foundation for each Iron Bull dump trailer, and ample grip for stopping power. A fresh coat of primer and powder coat gives each trailer a rugged finish with a showroom shine. 5/16 hydraulic cylinders are nested into a scissor hoist and provide the muscle for each Iron Bull dump trailer. Additional features include lifetime LEDs, provided by TecNiq lighting - and all units are powered by a deep cycle battery. 

Each Iron Bull Trailer also comes equipped with a standard tarp kit, spare tire mount, jack stand brackets, stake pockets, locking pump box, 5 position adjustable coupler, and 5 amp 110v wall outlet charging receptacle for your battery. Our 83" wide 14k bumper pull is by far our most popular model. With two 7k axles and tons of standard features and options for any need, this model is a perfect fit for the contractor or weekend warrior. We back all of this up with our industry-best IronClad warranty which covers every unit with a three year structural, two year component warranty and two years free roadside assistance.

Features May Include: 

• Side Armor™ Body Design
• S1235/80R16 Radial Tires
• Reinforced Top Rail
• Toolbox & Front Jack Bracket
• Dual 6" I-Beam Frame (24|bs/ft)
• 7 Gauge Steel Flooring on 83" Wide Models
• 4" Tubing Bed Frame
• Full Length Bed Runners & Ramp Pockets
• 10 Gauge 18" or 24" Steel Sides
• Standard Retractable Tarp Kit
• 10k Drop-Leg Jack
• 2 5/16" Adjustable Auto Latching Coupler
• 2 - 7k Cambered Brake Axles (8k & Triple 7 Available)
• Multi-leaf Slipper Spring Suspension
• Black Mod Wheels*
• Spare Tire Mount
• Slide-in Ramps
• Rear Support Stand Bracket
• Three-Way Spreader Gate
• Powder Coat & Primer
• Scissor Hoist with 516 Cylinder
• Double Acting Pump Unit w/ Gravity Down
• Flow Control Valve
• Locking Pump Box
• Standard Stake Pockets
• Weld On Diamond Plate Fenders
• Four Floor Mounted 1/2" D-Rings
• DOT Approved Lifetime LED Lighting
• Molded Sealed Harness with Resistors
• LED Voltage Indicater in Remote
• Built-In 5 amp Battery Charger
• 7-Way Receiver Female Plug w/ Adapter
• 26" Deck Height